This time, a customer visited us from Fukaya City, Saitama Prefecture, and requested a coating service for their Toyota 86‼️
The Toyota 86 is one of the most iconic sports cars, known for its stylish design and beautiful body lines.
The customer wanted to “keep their cherished vehicle beautiful for as long as possible,” and chose our professional coating service.
As you can see in the photos, a considerable amount of sand and dirt had accumulated on the body—so much that the water spots underneath were only faintly visible💦
For customers searching for a professional coating shop in Saitama Prefecture, particularly those around Kumagaya who are looking for a shop with proven skills and experience, we have earned the trust of many vehicle owners.
Through this case study, we would like to introduce our coating techniques and the attention to detail we put into every stage of the service.
…＊…
【What Is GARACORT BASE Diamond Coating?】
For this vehicle, we applied GARACORT BASE Diamond Coating.
This coating creates a highly durable protective layer by building up a high-quality glass coating containing diamond particles.
The resulting layer is extremely hard and substantial while still retaining flexibility. It is named “Diamond Coating” because it delivers hardness and brilliance inspired by diamond.
GARACORT BASE coatings offer a completely different level of durability compared with ordinary waxes and polymer-based coatings.
They provide powerful protection against everyday threats to your vehicle, including paint deterioration caused by ultraviolet rays, stains from acid rain, car-wash scratches, and corrosion caused by bird droppings or insect residue.
It is particularly well suited to vehicles with beautiful paintwork, such as sports cars.
Vehicles in Saitama Prefecture, including areas such as Fukaya City, are exposed to harsh environmental conditions including intense summer sunlight and high temperatures, as well as dry winter weather.
Even under these conditions, GARACORT BASE Diamond Coating can continue protecting the beauty of your cherished vehicle over a long period of time.
＊ Thorough Washing to Prepare the Surface ＊
One of the most important stages of coating installation is the washing process.
No matter how high-quality the coating product may be, it cannot perform to its full potential if the surface preparation is inadequate.
At our shop, we place great importance on an exceptionally thorough washing process.
First, we use a pressure washer to remove loose contamination from the entire body.
At this stage, we thoroughly clean areas that are often overlooked during ordinary washing, such as inside the wheel housings and around the door moldings.
Roads around Fukaya City can have considerable traffic, meaning that surprisingly large amounts of fine contamination and iron particles can accumulate on the vehicle🚗💦
Next, we carry out a hand wash using a dedicated automotive shampoo.
To avoid scratching the body, we use high-quality microfiber towels and gently but thoroughly remove contamination.
Dark-colored vehicles such as the Toyota 86 tend to show car-wash scratches more easily, so we proceed with particular care throughout the process💪
We then use an iron remover to chemically eliminate contamination that ordinary washing cannot remove, including brake dust and iron particles picked up from the road.
Vehicles driven on major roads throughout Saitama Prefecture often accumulate more iron contamination than expected, making this an extremely important stage🧽
Finally, we carry out a complete degreasing process to remove oils from the body surface.
This creates the ideal foundation for the coating to bond securely to the paintwork.
This time, as an additional service, we also gave the engine bay a light cleaning before moving on to the body polishing process♩
＊ Mirror-Finish Paint Correction ＊
Once the washing process was complete, we moved on to body polishing. It would not be an exaggeration to say that this is one of the most important stages in determining the final beauty of the coating‼️
The overall condition of this Toyota 86 was good, but there were still fine car-wash scratches from everyday use, as well as minor deterioration of the paint caused by ultraviolet exposure.
If coating were applied without correcting these imperfections first, the scratches and haze would simply be sealed underneath the protective layer.
At our shop, we use a polishing machine together with several different types of compounds, selecting the most suitable combination according to the condition of the paint.
A coarse compound is used to remove deeper scratches, a medium compound is then used to refine the surface, and finally an ultra-fine compound is applied to create a mirror-like finish.
This three-stage polishing process restores the deep gloss and brilliance of the paint to a level that looks almost like new.
The hood and roof of the Toyota 86 are particularly large areas where scratches tend to become noticeable under reflected light.
For these sections, we take extra time to polish carefully and aim for the best possible finish.
Some customers considering car coating in Saitama Prefecture are concerned that “polishing removes paint and may not be good for the vehicle.”
However, when the work is carried out by a technician with the proper skills and experience, it is possible to achieve a beautiful finish without negatively affecting the paintwork.
At our shop, we use a paint thickness gauge to measure the coating thickness while working, so you can leave your vehicle with us with confidence😊
＊ Applying Diamond Coating to the Body ＊
Once the polishing process has created the ideal surface, we finally begin applying GARACORT BASE Diamond Coating.
The coating is carefully applied using a dedicated applicator sponge.
Temperature and humidity control are also extremely important during this process, so we carry out the installation inside a dedicated booth under optimized conditions.
Summer temperatures in Fukaya City can become extremely high, but by controlling the working environment, we are able to provide consistent coating quality regardless of the season.
GARACORT BASE Diamond Coating can form an even thicker and stronger protective layer when applied in multiple coats.
Due to time constraints, this vehicle was delivered with a single layer this time, but our usual recommendation is to apply the first layer, allow it to cure for the appropriate amount of time, and then add a second and third layer.
This multilayer structure creates an outstanding level of protection and brilliance that cannot be achieved with a single-layer coating💎
Applying the coating evenly and consistently along the beautiful body lines of the Toyota 86 requires true craftsmanship.
Any missed areas or uneven application can directly affect the final appearance after coating, so every section is treated with the utmost care and attention.
This full-set plan also includes coating for the windshield.
By using a dedicated coating product specifically designed for glass surfaces, we can maintain strong water-repellent performance and significantly improve visibility when driving in the rain👀
When driving around Saitama Prefecture, particularly in the Kumagaya area, sudden localized downpours are not uncommon.
With glass coating applied, water forms into droplets and rolls off the surface more easily, reducing the frequency with which the wipers need to be used.
This not only helps maintain better visibility, but can also contribute to extending the lifespan of the wiper blades.
The process begins by completely removing oily film from the glass using a dedicated cleaner.
On a low sports car such as the Toyota 86, oily contamination thrown up from vehicles ahead can easily adhere to the windshield, making this surface preparation especially important.
After cleaning, the dedicated glass coating is carefully applied and allowed to cure.
This treatment not only improves safety in rainy conditions, but also makes it more difficult for insects and dirt to bond to the glass, making everyday maintenance significantly easier🐝
＊ Coating for Unpainted Plastic Trim ＊
The Toyota 86 has a number of unpainted plastic components around areas such as the door mirrors, door handles, side trim, and lower sections of the bumpers.
These parts are particularly vulnerable to ultraviolet exposure and can gradually fade to a whitish appearance, which can significantly affect the overall look of the vehicle.
At our shop, we protect these areas using a dedicated coating specifically designed for unpainted plastic trim.
First, we use a specialized cleaner to remove contamination and old wax residue from the plastic surfaces before applying the coating.
This treatment restores a deep, rich black appearance while also helping prevent fading caused by ultraviolet rays over a long period of time.
Even under the intense sunlight experienced in Saitama Prefecture, the beauty of these unpainted plastic areas can be maintained for longer.
On a sports car such as the Toyota 86, the appearance of these small details has a major impact on the overall impression.
By carefully treating not only the body but also these finer areas, we can achieve a finish that looks almost as if the vehicle were on display in a showroom.
＊ Wheel Coating for a Complete Finish ＊
The final stage of the full-set plan is wheel coating.
The wheels are among the areas most prone to contamination from brake dust and road grime, making them one of the most difficult parts of the vehicle to maintain.
By applying a dedicated wheel coating, contamination becomes significantly less likely to bond strongly to the surface, making everyday washing much easier.
When driving around the Kumagaya area, brake dust inevitably accumulates over time, but coated wheels can often be cleaned much more easily with a simple water rinse🛞
Before applying the coating, we thoroughly clean the wheels using dedicated wheel cleaners and brushes, including the spokes and the rear side of the rims.
After cleaning, a highly heat-resistant wheel coating is carefully applied and allowed to cure.
When the wheels are coated as well, the shine becomes consistent from the body all the way down to the vehicle’s lower areas, dramatically improving the overall appearance.
The sharp, athletic styling of the Toyota 86 became even more impressive after completion.
＊ Aftercare and Maintenance Advice Following the Service ＊
Once all work is complete, we provide the customer with detailed guidance on how to maintain the vehicle.
GARACORT BASE Diamond Coating is highly durable, but proper maintenance can help preserve its performance for even longer.
As a general guideline, washing the vehicle approximately once every two weeks is sufficient.
Temperatures in Saitama Prefecture, particularly around Fukaya City, can become extremely high during summer, so we recommend avoiding washing under intense midday sunlight and instead washing early in the morning or later in the evening when temperatures are cooler.
Regular maintenance coating every three to six months can also help maintain water-repellent performance and reduce deterioration of the protective coating layer.
We provide comprehensive maintenance support after installation as well, so please feel free to consult us.
【For Those Considering Car Coating in Saitama Prefecture】
Our shop receives car coating requests from customers throughout Saitama Prefecture, with many coming from the Kumagaya area.
With proven technical skills, extensive experience, and above all a commitment to putting customer satisfaction first, we have earned the trust of many vehicle owners.
If you are searching for a professional car coating shop in Saitama Prefecture, or are looking for a specialist around Kumagaya that provides high-level coating services, please feel free to consult us.
Free quotations are also available, so you are welcome to contact us with any questions.
We provide coating services for all types of vehicles, from Japanese sports cars such as the Toyota 86 to luxury imported vehicles, SUVs, and kei cars.
We will recommend the most suitable coating plan for your cherished vehicle.
As with the full-set plan introduced in this case study, protecting not only the body but also the glass, unpainted plastic trim, and wheels allows the entire vehicle to remain beautiful down to the smallest detail.
If you are looking for a higher level of car coating service in Saitama Prefecture, please leave your vehicle to our experienced team with proven technical expertise.
Instagram
スポーツカーの代表格であるトヨタ86は、そのスタイリッシュなデザインと美しいボディラインが魅力の車両です。お客様は「大切な愛車を長く美しく保ちたい」というご要望をお持ちで、当店の本格的なコーティング技術をお選びいただきました。
お写真の通り砂汚れが積もっており奥にある水しみが薄く見えてしまうほどです💦
埼玉県内でコーティング専門店をお探しの方、特に熊谷市周辺で確かな技術と実績のある施工店をお求めの方に、当店は多くのお客様からご信頼いただいております。今回の施工実績を通じて、当店のコーティング技術と施工へのこだわりをご紹介させていただきます。
…＊…
【ガラコートベース・ダイヤモンドコーティングとは】
今回施工したのは、ガラコートベースのダイヤモンドコーティングです。このコーティングは、ダイヤモンド粒子の含有された高品質ガラス被膜を重ねることで、非常に硬く厚みがありながらも柔軟性のある保護層を形成します。ダイヤモンドの硬度と輝きを実現することから、この名称がついています。
ガラコートベースのコーティングは、一般的なワックスやポリマー系コーティングとは全く異なる耐久性を持ちます。紫外線による塗装の劣化、酸性雨によるシミ、洗車傷、鳥のフンや虫の死骸による腐食など、日常的に愛車を脅かすダメージから強力に保護します。特にスポーツカーのような美しい塗装を持つ車両には、最適なコーティングと言えるでしょう。
埼玉県内、特に深谷市のような気候では、夏場の強い日差しと高温、冬場の乾燥といった過酷な環境に車両が晒されます。こうした環境下でも、ガラコートベースのダイヤモンドコーティングなら、長期間にわたって愛車の美しさを守り続けることができます。
＊ 徹底的な洗車で下地を整える ＊
コーティング施工において、最も重要な工程の一つが洗車です。どれほど高品質なコーティング剤を使用しても、下地処理が不十分では本来の性能を発揮できません。当店では、埼玉県内でもトップクラスの丁寧な洗車工程にこだわっています。
まず、高圧洗浄機を使用してボディ全体の大まかな汚れを除去します。この段階で、ホイールハウス内やドアモール周辺など、通常の洗車では見落としがちな部分まで徹底的に洗浄します。深谷市周辺は交通量も多く、ボディには想像以上に細かな汚れや鉄粉が付着しているものです🚗💦
次に、専用のカーシャンプーを使用して手洗い洗車を行います。この際、ボディに傷をつけないよう、高品質なマイクロファイバータオルを使用し、優しく、しかし確実に汚れを落としていきます。特にトヨタ86のような濃色車は、洗車傷が目立ちやすいため、細心の注意を払いながら作業を進めます💪
さらに、鉄粉除去剤を使用して、ブレーキダストや道路上の鉄粉など、通常の洗車では落とせない汚れを化学的に除去します。埼玉県内の幹線道路を走行する車両には、予想以上に鉄粉が付着しているケースが多く、この工程は非常に重要です🧽
最後に、脱脂作業を行い、ボディ表面の油分を完全に除去します。これにより、コーティング剤が塗装面にしっかりと密着する下地が完成します。
This time, a customer visited us from Fukaya City, Saitama Prefecture, and requested a coating service for their Toyota 86‼️
The Toyota 86 is one of the most iconic sports cars, known for its stylish design and beautiful body lines.
The customer wanted to “keep their cherished vehicle beautiful for as long as possible,” and chose our professional coating service.
As you can see in the photos, a considerable amount of sand and dirt had accumulated on the body—so much that the water spots underneath were only faintly visible💦
For customers searching for a professional coating shop in Saitama Prefecture, particularly those around Kumagaya who are looking for a shop with proven skills and experience, we have earned the trust of many vehicle owners.
Through this case study, we would like to introduce our coating techniques and the attention to detail we put into every stage of the service.
…＊…
【What Is GARACORT BASE Diamond Coating?】
For this vehicle, we applied GARACORT BASE Diamond Coating.
This coating creates a highly durable protective layer by building up a high-quality glass coating containing diamond particles.
The resulting layer is extremely hard and substantial while still retaining flexibility. It is named “Diamond Coating” because it delivers hardness and brilliance inspired by diamond.
GARACORT BASE coatings offer a completely different level of durability compared with ordinary waxes and polymer-based coatings.
They provide powerful protection against everyday threats to your vehicle, including paint deterioration caused by ultraviolet rays, stains from acid rain, car-wash scratches, and corrosion caused by bird droppings or insect residue.
It is particularly well suited to vehicles with beautiful paintwork, such as sports cars.
Vehicles in Saitama Prefecture, including areas such as Fukaya City, are exposed to harsh environmental conditions including intense summer sunlight and high temperatures, as well as dry winter weather.
Even under these conditions, GARACORT BASE Diamond Coating can continue protecting the beauty of your cherished vehicle over a long period of time.
＊ Thorough Washing to Prepare the Surface ＊
One of the most important stages of coating installation is the washing process.
No matter how high-quality the coating product may be, it cannot perform to its full potential if the surface preparation is inadequate.
At our shop, we place great importance on an exceptionally thorough washing process.
First, we use a pressure washer to remove loose contamination from the entire body.
At this stage, we thoroughly clean areas that are often overlooked during ordinary washing, such as inside the wheel housings and around the door moldings.
Roads around Fukaya City can have considerable traffic, meaning that surprisingly large amounts of fine contamination and iron particles can accumulate on the vehicle🚗💦
Next, we carry out a hand wash using a dedicated automotive shampoo.
To avoid scratching the body, we use high-quality microfiber towels and gently but thoroughly remove contamination.
Dark-colored vehicles such as the Toyota 86 tend to show car-wash scratches more easily, so we proceed with particular care throughout the process💪
We then use an iron remover to chemically eliminate contamination that ordinary washing cannot remove, including brake dust and iron particles picked up from the road.
Vehicles driven on major roads throughout Saitama Prefecture often accumulate more iron contamination than expected, making this an extremely important stage🧽
Finally, we carry out a complete degreasing process to remove oils from the body surface.
This creates the ideal foundation for the coating to bond securely to the paintwork.
本次，一位来自埼玉县深谷市的客户到店，委托我们为丰田86进行汽车镀膜施工‼️
丰田86作为极具代表性的运动跑车，拥有时尚的设计以及优美流畅的车身线条。
客户希望“让珍贵的爱车长期保持漂亮状态”，因此选择了本店专业的汽车镀膜施工。
正如照片中所看到的，车身表面已经积累了大量砂土污渍，甚至连下方原本存在的水渍都只能隐约看见💦
对于正在埼玉县内寻找专业汽车镀膜店的客户，特别是在熊谷市周边，希望找到拥有可靠技术和丰富施工经验的专业店的车主，本店已经获得了许多客户的信赖。
通过本次施工案例，我们也希望向大家介绍本店的汽车镀膜技术，以及我们对每一道施工工序的坚持。
…＊…
【什么是GARACORT BASE钻石镀膜】
本次施工采用的是GARACORT BASE钻石镀膜。
这种镀膜通过层层形成含有钻石粒子的高品质玻璃保护膜，在车漆表面形成非常坚硬、厚实，同时又具备一定柔韧性的保护层。
由于能够呈现出如钻石般的硬度及光泽，因此被命名为“钻石镀膜”。
GARACORT BASE镀膜与普通车蜡及聚合物类镀膜相比，拥有完全不同等级的耐久性能。
它能够强力保护车辆，抵御日常生活中可能对爱车造成损伤的各种因素，包括紫外线导致的车漆老化、酸雨造成的污渍、洗车划痕，以及鸟粪和昆虫残留物造成的腐蚀等。
对于运动跑车这种拥有漂亮漆面的车辆来说，可以说是非常适合的一种汽车镀膜。
埼玉县内，特别是深谷市这样的地区，车辆夏季会受到强烈阳光及高温影响，冬季则会面临干燥等严酷环境。
即使在这样的条件下，GARACORT BASE钻石镀膜也能够长期保护爱车原本的美丽状态。
＊ 通过彻底洗车完成基础处理 ＊
在汽车镀膜施工中，洗车是最重要的工序之一。
无论使用多么高品质的镀膜产品，如果基础处理不充分，都无法发挥其原本的性能。
本店一直坚持进行细致彻底的洗车处理。
首先使用高压清洗机，清除整个车身表面的大部分污渍。
在这一阶段，包括轮拱内部、车门饰条周围等普通洗车容易忽略的区域，也会进行彻底清洁。
深谷市周边道路交通量较大，因此车身上往往会附着比想象中更多的细小污渍及铁粉🚗💦
接下来使用专用汽车洗车液进行手工清洗。
为了避免在车身表面形成划痕，我们使用高品质超细纤维毛巾，以轻柔但确实的方式清除污渍。
尤其是像丰田86这样的深色车辆，洗车划痕会更加明显，因此整个施工过程中都会格外谨慎💪
随后使用专业铁粉去除剂，对刹车粉尘、道路上的铁粉等普通洗车难以清除的污染物进行化学分解处理。
在埼玉县内主要道路行驶的车辆，往往会附着比预想中更多的铁粉，因此这一步骤非常重要🧽
最后进行彻底脱脂处理，将车身表面的油分完全清除。
这样便能够形成一个让镀膜产品与车漆表面充分牢固结合的理想基础。